AVIATICON Finkofreeze PRO

AVIATICON Finkofreeze PRO is an environmentally safe antifreeze concentrate on the basis of propyleneglycol.

AVIATICON Finkofreeze PRO  as a mixture with the appropriate amount of water - is used as a cold and heat transfer fluid in combustion engines. The engine gives the combustion heat off to the coolant.Through the cooler the heat is then dissipated to the airflow.  AVIATICON Finkofreeze PRO  - coolant protection on the basis of propylene-glycol - a guarantee for a maintenance-free antifreeze

AVIATICON Finkofreeze PRO  - coolant protection on the basis of propylene-glycol - a guarantee for a maintenance-free antifreeze. The patented silica-free carboxylate technology with AVIATICON Finkofreeze PRO  ensures durable protection for all materials used in the engine, specifically for aluminum and iron alloys. The synergistic combination of monocarboxylates and dicarboxylates in this refrigerant has been confirmed by comprehensive fleet tests. Great efficiency was observed in utility vehicles above 650,000 km (aprox. 8,000 hours), while for passenger cars this amounts to over 250,000 (aprox. 2,000 hours) and in stationary cars over 32,000 hours (or 6 years). It is recommended to change the antifreeze every 5 years or when the above-mentioned service life intervals are met. AVIATICON Finkofreeze PRO  offers durable protection against all types of corrosion, thanks to its optimised and patented organic corrosion inhibitors.

Permanent protection is guaranteed specifically for aluminum surfaces of modern engines. The AVIATICON Finkofreeze PRO  - Inhibitor pack offers excellent cavitation protection. Even in trucks and buses, the traditional „supplemental coolant additives (SCA)” on the basis of nitrite are no longer required.

AVIATICON Finkofreeze PRO  can be used without restrictions in engines of cast iron, aluminum or in a combination of both metals as well as in cooling systems of aluminum or copper alloys. AVIATICON Finkofreeze PRO is highly recommended for light metal engines, which require a special aluminum protection in high temperatures.

Resistant materials: IIR, FPM, NR, NBR, EPDM, POM, PA, PB, CR, UP, VPE, HDPE, PP,PTFE, SBR, PVC h.

Tested for corrosion: Steel, cast iron, copper, brass, stainless steel, aluminum, aluminum cast, soft solder.

Caution: Do not store in galvanised containers or galvanised equipment

Mixing table:
 

Frost resistance to	mixing ratio Concentrate :Water
-37 °C	1 : 1
-27 °C	1 : 1,5
-20 °C	1 : 2